|
ATHLETE FAN FILTER UNITS Athlete Fan Filter Units (FFU's) are air-cleaning equipments that provide a continuous supply of bacteria free laminar airflow. These equipments work by treating the dirty air in a given room by continuous recirculation through a high efficiency particulate air (HEPA) filter. Depending upon the area and level of cleanroom class to be achieved the customer can opt for different sizes and number of equipments. These equipments are highly energy efficient requiring as low as only 85Watts of power in a 2' x 2' unit. Other than this there is no need to build special air supply ducts for these units unless otherwise required, as they have an inbuild motor/blower assembly for air recirculation. These unit can either be hanged on a wall or ceiling mounted as per requirement. FFU's are totally self-sufficient plug-n-play equipments and only require a source of 230V~ of power supply to operate. These units are very easy to maintain as they have a cassette style rear channel for sliding pre filter and a detachable front panel to easily unscrew the HEPA filters when service is required. Features:
- Available in standard sizes of 4' x 2', 3' x 2' and 2' x 2' in height of 12". Non standard sizes available on request
- Option of SS 304 (or) SS 316 (or) Aluminium (or) Galvanized sheet steel enclosure with suitable surface finish.
- Option of down stream perforated grille having MOC SS 304 (or) SS 316 (or) Aluminium (or) Galvanized sheet steel with suitable surface finish if needed.
- Replaceable H13 or H14 Mini pleat Hepa Filter and 5 micron Pre filter.
- Facility to measure pressure differential across Hepa Filter.
- Suitable for ceiling suspension or for direct fitment on mezzanine floor.
- Energy efficient reverse centrifugal impeller.
- Dynamically balanced motor and blower for reduced vibration.
- Filtration up to 0.3 microns down to 99.999% efficiency.
- Noise level less than 65 dB.
- Face velocity of 0.45 m/s.
- Acoustic insulation for reduced noise.
- Tested for Air Flow rate, Particle counts, noise level and DOP scan.
- Most suitable for clean room applications involving short project times, and reduced space for installing supply and return ducts above false ceiling.
*Custom build sizes available on request
|
